 |
|
|
|
|
|
Not a member? Join Today to see why so many say they are Proud to be a Venturer!
|
|
| Removing The Mufflers |
|
Author: Peter Behm Views: 9941 Votes: 0 |
|
Removing The Mufflers
To start out you will want to remove the saddle bags as shown here. http://www.venturers.org/Tech_Library/index.php?action=article&cat_id=002004&id=269 The next step is to loosen the bolt on the clamp here. A 12mm is required.
The next bolt to remove is this one which holds the muffler to the bracket. A 14 mm is required.
Reinstalling is just the opposite. You should be fine reusing the gasket on the intake of the muffler as long as it isn't cut or banged up.
Last update: 09:58 AM Monday, March 6, 2006 |
| All material on webpages under the domain venturers.org, is the property of The Venturers, Inc. These materials are protected by copyright and other intellectual property laws. You may not reproduce or retransmit the materials, in whole or in part, in any manner, without the prior written consent of The Venturers, Inc. The free information contained herein is offered in the spirit of helping others and any action or advice taken from these pages is the sole responsibility of the receiver. |
