The Venturers - Yamaha Venture Technical Support Library

Not a member? Join Today to see why so many say they are Proud to be a Venturer!

Library Home Page > 2nd Generation (1999 to current) > Aftermarket Products

FAQ: Which Kuraykyn Pegs To Buy?

  Author: Gary L Mace (Venturous)
  Views: 11174     Votes: 18
  Print

FAQ: Which Kuryakyn highway pegs work best on the RSV. There seems to be several that will fit.

Several 1" offset pegs will work with the RSV. The primary difference is the amount of adjustment range each offers.

The 7976 is a 2" arm and gives you a 4" adjustment range.

The 7980 are the longhorn offsets. These are a bit more stylish and are 3 1/4" long which gives you a 6 1/2" adjustment range.

The 4050 are the euro offset design and come with a bit more advanced clamp set-up. The arms are 6" long giving a 12" adjustment range.

I have the 7976 set-up on my bike. I am about 5' 9" with a 30" inseam and they work fine. had they been available though at the time, I would have spent the extra few bucks and got the longhorn offsets. (7980). Personally, I don't think on our bikes the 4050's would really offer any usable difference.

Hope this helps.

Gary Mace (Venturous)

Last update: 06:48 AM Saturday, June 11, 2005

All material on webpages under the domain venturers.org, is the property of The Venturers, Inc. These materials are protected by copyright and other intellectual property laws. You may not reproduce or retransmit the materials, in whole or in part, in any manner, without the prior written consent of The Venturers, Inc. The free information contained herein is offered in the spirit of helping others and any action or advice taken from these pages is the sole responsibility of the receiver.