 |
|
|
|
|
|
Not a member? Join Today to see why so many say they are Proud to be a Venturer!
|
|
| O-Ring Replacement |
|
Author: Archives Views: 7052 Votes: 1 |
O-Ring ReplacementA lot of us have had trouble with the O ring in the thermostat bypass valve on the front of the engine going bad. I replaced mine about 5 years ago with one from my local auto-parts store that cost about 50 cents and took about 5 minutes to change. It only leaked once in a while, and only on cool days. If you have the same problem, just pull the set screw in the side of the valve, and the plunger will come right out. Change the O ring and put it all back together........Frank Denk (83)
Last update: 07:41 AM Sunday, September 26, 2004 |
| All material on webpages under the domain venturers.org, is the property of The Venturers, Inc. These materials are protected by copyright and other intellectual property laws. You may not reproduce or retransmit the materials, in whole or in part, in any manner, without the prior written consent of The Venturers, Inc. The free information contained herein is offered in the spirit of helping others and any action or advice taken from these pages is the sole responsibility of the receiver. |
