The Venturers - Yamaha Venture Technical Support Library

Not a member? Join Today to see why so many say they are Proud to be a Venturer!

Library Home Page > 1st Generation (1983 to 1993) > Engine

Coolant Valve Setting

  Author: Archives
  Views: 9308     Votes: 2
  Print

Coolant Valve Setting

Ok boys and girls, here is what my owner manual says:

To drain turn to ON
to refill close everything leave in on position
run and recheck levels
TURN TO OFF position, reinstall panels

There is a small indentation on the drain cock about the 1-2 oclock position as you look from the front of the bike. Line the OFF position with it. My pour is inverted at about the 12 oclock position.

Hope this helps

Hank

Last update: 07:35 AM Sunday, September 26, 2004

All material on webpages under the domain venturers.org, is the property of The Venturers, Inc. These materials are protected by copyright and other intellectual property laws. You may not reproduce or retransmit the materials, in whole or in part, in any manner, without the prior written consent of The Venturers, Inc. The free information contained herein is offered in the spirit of helping others and any action or advice taken from these pages is the sole responsibility of the receiver.